Broadband Setup for Windows 7

Important

Please note that by default all of our modems are delivered pre-configured to automatically connect to the internet. These instructions are only required if your own supplied modem is not capable of 'PPPoE' mode.

Step 1.

Select the Start button, then Control Panel, then Network and Internet, then Network and Sharing Center, then on the bottom, select "Setup a new connection or network"

Step 2.

Select Connect to the Internet and press the Next button.

Step 3.

Press "Broadband (PPPoE)".

Step 4.

Enter the phone number of the access area you are dialing, your login username and password and make sure that the "Remember this password" is checked. Then enter "Start Communications" as the Conection name and click Connect.